• Bookstore

The benefits of hybrid vehicles are becoming ever more apparent: you get the range and the power but with lower emissions.  Some manufacturers are exploring purely electric vehicles, such as Vetrix, the plug-in scooter, but this is the first hybrid scooter.  As yet there is no indication when the scooter will arrive in the United Kingdom, or at what price.

Two engines in one

Piaggio HyS is a 'parallel' hybrid in which a combustion engine and an electric motor are mechanically and electronically linked and simultaneously supply power to the wheel.

In this linked petrol/electric engine, the gasoline engine behaves like a normal catalysed four-stroke engine with excellent performance and distance range on the one hand and low emissions and fuel consumption on the other. The automatic gearbox, electric ignition and automatic start provide the usual zip and ease of use in town as well as out-of-town trips. The petrol engine offers sparkling performance in standard running, charging the electric motor all the while. And, whenever the rider needs to accelerate particularly fast - when starting from a stopped position, for example - the electric motor assists the engine, supplying about 85% extra performances that gives the vehicle snappier, more efficient acceleration over the first few metres, when it is really needed in town riding.

In-built electronic management combines the two engines to offer not only better acceleration but also a reduction in fuel consumption (up to 60km/l) and in CO2 emissions, only 40g/km (using 65% the hybrid modes and 35% the electric one).

The Piaggio HyS is not your average hybrid engine: other scooters may stop, but the HyS keeps going, quick and silent, because it can also work in electric-only mode with a range up to 20km.

The rider simply turns a handlebar switch to shut down the combustion engine and turn the Piaggio HyS into a totally environment-friendly scooter, a zero-emissions vehicle that can go into any area closed to other types of traffic. Another turn of the switch and the thermal engine turns itself on and goes back to being the main engine, charging the battery as it travels through areas open to normal traffic.

The scooter's range can be optimised in the garage by charging the battery from an electricity source using the 220V battery charger. This reduces running costs, electricity being cheaper than gasoline.

Technology at the flick of a switch

The rider uses all the normal controls (accelerator, brakes and additional handlebar commands) as well as a specific switch to choose one of the different operating modes: three hybrid, one electric-only and the reverse.

In the first three modes the HyS manages power output from the two engines, thermal and electric, using a drive-by-wire type system: the electronic management system (SGE) interprets the rider's request for more torque and selects the assist ratio based on the state of the system (e.g. the level of battery charge). During deceleration and braking, the control system recovers and accumulates power that is lost on normal vehicles in the battery.

The three hybrid modes are designed to optimise performances, consumption and battery charge.

In electric-only mode, the Piaggio HyS shuts down the combustion engine and turns into a silent, zero-emission electric vehicle.

Drive-by-wire technology not only allows the control system to optimally manage the combined power output of the two engines but also 'forces' the combustion engine to work when it can be most efficient, thereby reducing specific consumption, with obvious advantages in terms of lower consumption and emissions.

All this technology is neatly tucked away. The three Piaggio HyS versions look like any standard Vespa LX, Piaggio X8 or MP3.

On X8 and MP3 versions the traction batteries are hidden in the under-seat storage space, which is sufficiently large to also hold a helmet. The Vespa LX hybrid prototype comes with a top case to hold the helmet.

There is a battery charge indicator on the dashboard. The battery can be recharged from an electricity source by inserting a normal cable into the plug provided for this purpose. Charging time is about three hour.