New Membrane Catches CO2

Last edited: Friday, 21st September 2007, 3:18 pm
Email to a friend   Print article  

Approximately one third of the total carbon dioxide (CO2) emissions in the world come from energy production. CO2 free gas-powered plants are based on carbon dioxide being removed from the waste gases and deposited in the ground.

However, before CO2 can be stored, it must be separated from the waste gases. The current methods used for this type of filtration are expensive and require the use of chemicals. A new membrane technology is going to change that.

The patented membrane has been developed by researchers at The Norwegian University of Science and Technology (NTNU) in Trondheim. The membrane is made from a plastic material that has been structured by means of nano technology. It catches CO2 while other waste gases pass freely.

The makers claim that the technology is effective, inexpensive and eco-friendly, and can be used for practically all types of CO2 removal from other gases. Its effectiveness increases proportionally to the concentration of CO2 in the gas.

Copying lungs
This method is called "facilitated transport" and is comparable to the way our lungs get rid of CO2 when we breathe: it is a complex but effective mechanism.

NTNU Professor May-Britt Hägg, head of the research group Memfo that works on the new membrane, said:
"The novelty is that instead of using a filter that separates directly between CO2 and other molecules, we use a so-called agent. It is a fixed carrier in the membrane that helps to convert the gas we want to remove."

The agent helps so that the CO2 molecules in combination with moisture form the chemical formula HCO3 (bicarbonate), which is then quickly transported through the membrane. In this manner, the CO2 is released while the other gases are retained by the membrane.

Nanoplastic
Various materials are used to make membranes. It could be plastic, carbon and/or ceramic materials. Membrane separation of gases is a highly complex process. The materials must be tailored in an advanced way to be adapted to separate specific gases. They must be long-lasting and stable.

The new membrane is made of plastic, structured by means of nano technology to function according to the intention. Membranes based on nano-structured materials are eco-friendly and will reduce the costs of CO2 capture.

Hägg added:
"With this method, we can remove more CO2 and obtain a cleaner product for smaller plants. Thus, it becomes less expensive.

"We also have membranes today that are used to separate CO2 and have been used for a couple of decades, but these membranes are used for natural gases at high pressures, and are not suited for CO2 from flue gas. If the membrane separated poorly, very large amounts of the material is needed, and that makes this separation expensive."

Membranes have a major potential to become an inexpensive and eco-friendly alternative in the future. An international patent has been taken out for the new type. Manufacturers both in Europe and the USA have taken an interest in putting it into production, the professor reveals.

Testing in Europe
Memfo recently joined a consortium of 26 European businesses and institutions within a project named NanoGloWa – Nanostructured Membranes against Global Warming. The consortium has received EUR 13 million to develop such membranes, with EUR 1 million going to Memfo.

According to Hägg, the new technology ought to be very interesting for coal-powered plants. "Within a five-year period, the plan is to test the membrane technology in four large power plants in Europe. We believe this will result in an international breakthrough for energy-efficient CO2 membranes," she said.

When it comes to gas-powered plants, the concentration of CO2 is so low that the pressure in the waste gas must be increased before the gas can be cleaned with this method. However, Professor Hägg reveals that Statoil is currently developing a method for pressurised exhaust that could be combined with this membrane technology, and that would make it interesting for purification in gas-powered plants as well.

Besides CO2 purification in energy production, the method could be used for more or less any type of purification where carbon dioxide is removed from other gases.

"For instance, we are testing this method to purify CO2 from laughing gas in hospitals, and the results are promising," concludes Professor May-Britt Hägg.


 

Comments (0)

No comments have so far been submitted. Why not be the first to send us your thoughts?

Add your Comment

You have some errors in your comments. Please note: comments cannot contain any html.
(Your email address will not be published.) (Optional) Make Bigger
You have 1000 characters left.
 
 
 
 
     © TenBees 2007-2009      This work is licensed under a Creative Commons Attribution-Share Alike 3.0 License.   Creative Commons License